Product information

Siding, siding.X and perforated siding are available in variable lengths and are fabricated to required dimensions according to the provided installation plan. The length tolerance is ±2 mm.

Siding with a profile depth of 22 mm

500–2,500 mm for all visible widths (with PREFA joint)
500–6,200 mm for all visible widths (without PREFA joint)

Siding with a profile depth of 32 mm

500–2,500 mm for all visible widths (with PREFA joint)
700 – 3,500 mm for all visible widths (without PREFA joint)

Note

Mixed installation of sidings with different profile depths (22 mm and 32 mm) is not possible due to the profile geometry.

Siding, siding.X and perforated siding are produced with a stop end on both sides as standard.

The factory stop end for siding, siding.X and perforated siding is:

11 mm for a profile depth of 22 mm
20 mm for a profile depth of 32 mm

Stop end

Siding, siding.X and perforated siding can be installed horizontally, vertically or diagonally.

The following must be taken into account during installation:

Horizontally: Installation always from bottom to top
Vertically: Installation from left to right or right to left
Diagonally: from bottom left to top right or from bottom right to top left

Note

The installation of siding, siding.X and perforated siding from top to bottom is not recommended by PREFA, since the installation direction is against the flow of water.

product information