Website Search (After submitting you will be redirected to the search results page.)

ROOF SYSTEMS DS.19 SHINGLE

Classic single-family house with two skylights and chimney, roofed with the new PREFA DS.19 shingle in P.10 oxide red. Classic single-family house with two skylights and chimney, roofed with the new PREFA DS.19 shingle in P.10 oxide red. Classic single-family house with two skylights and chimney, roofed with the new PREFA DS.19 shingle in P.10 oxide red. Classic single-family house with two skylights and chimney, roofed with the new PREFA DS.19 shingle in P.10 oxide red. Classic single-family house with two skylights and chimney, roofed with the new PREFA DS.19 shingle in P.10 oxide red. Classic single-family house with two skylights and chimney, roofed with the new PREFA DS.19 shingle in P.10 oxide red. Classic single-family house with two skylights and chimney, roofed with the new PREFA DS.19 shingle in P.10 oxide red. Classic single-family house with two skylights and chimney, roofed with the new PREFA DS.19 shingle in P.10 oxide red. Classic single-family house with two skylights and chimney, roofed with the new PREFA DS.19 shingle in P.10 oxide red.
PREFA DS.19 shingle P.10 brown PREFA DS.19 shingle P.10 anthracite PREFA DS.19 shingle P.10 black PREFA DS.19 shingle P.10 brick red PREFA DS.19 shingle P.10 oxide red PREFA DS.19 shingle P.10 moss green PREFA DS.19 shingle P.10 light grey PREFA DS.19 shingle P.10 nut brown PREFA DS.19 shingle in P.10 stone grey
AVAILABLE COLOURS

DS.19 SHINGLE – INFORMATION

The new and innovative DS.19 shingle is not only a highlight in terms of its appearance. The new shingle can be installed on a roof pitch of 17°, thus setting new standards in this product segment.

DS.19 shingle is especially light and proves itself from small surfaces right through to major projects. The fold-in-fold system ensures that DS.19 shingles are not only incredibly storm-proof and weather-proof, but also look great.

Due to their traditional appearance they are above all ideally suited to classical roof structures. Nonetheless, it can also create an interesting contrast when combined with modern architecture.

  • For any project: from the smallest building to a major project
  • Modern appearance and large range of colours in P.10 quality
  • Can be used for roof pitches of 17° and higher
  • Particularly light, storm-proof and weather-resistant

 

DS.19 SHINGLE – TECHNICAL INFORMATION

  • Available in 9 standard colours (stucco surface)
  • Also available with a smooth finish upon request
MATERIAL:
aluminium 0.7 mm thick
VISIBLE SIDE:
Coil coating
REAR:
protective paint
SIZE:
480 × 262 mm (cover)
WEIGHT:
1 m² = approx. 2,75 kg = 8 DS.19 shingles
ROOF PITCH:
from 17°
INSTALLATION:

from 17 to 25° you need solid sheathing; or with snow loads greater than 3.25 kN/m² (reference height for Switzerland: 925 m); or in terrain categories 0, I or II, solid sheathing with a bitumen layer is required

FASTENING:

1 patent clip per DS.19shingle = 8 patent clips per m²

ROOF STRUCTURE

The attic can also be used as living space

The attic is not used as living space

DS.19 SHINGLE – COLOUR CHART

THE PRODUCT IS AVAILABLE IN THE FOLLOWING COLOURS

COLOUR ~ RAL ~ NCS
01 P.10 brown 7013 S 8005-Y20R
02 P.10 anthracite 7016 S 8502-B
03 P.10 black 9005 S 9000-N
04 P.10 brick red 8004 S 4550-Y60R
05 P.10 oxide red 3009 S 0530-Y90R
06 P.10 moss green 6005 S 7020-G
07 P.10 light grey 7005 S 6000-N
11 P.10 nut brown 8019 S 8005-Y80R
43 P.10 stonegrey¹ 7031 S 6005-R80B
01 P.10 BROWN
7013
S 8005-Y20R
02 P.10 ANTHRACITE
7016
S 8502-B
03 P.10 BLACK
9005
S 9000-N
04 P.10 BRICK RED
8004
S 4550-Y60R
05 P.10 OXIDE RED
3009
S 0530-Y90R
06 P.10 MOSS GREEN
6005
S 7020-G
07 P.10 LIGHT GREY
7005
S 6000-N
11 P.10 NUT BROWN
8019
S 8005-Y80R
43 P.10 STONEGREY¹
7031
S 6005-R80B

¹ The colours P.10 stone grey, P.10 sand brown, P.10 rust brown, P.10 patina green, light wood, dark wood, patina grey and natural blank reflect natural colouring and are therefore subject to minimal variation, which gives the products their unmistakable character.

Notes

  • The RAL and NCS values stated are merely approximate values (~), some of which may differ vastly from the original PREFA colour and, under certain circumstances, may not reflect the subjective perception of the colour. 
  • Above all for colour quality P.10, it is almost impossible to define values due to the surface structure. Furthermore, the colours P.10 stone grey, P.10 sand brown, P.10 rust brown, P.10 patina green, light wood, dark wood, and patina grey reflect natural colourings that are composed of several colour tones.
  • To identify exact colours for complementary components please consult original samples.
COLOUR DETAILS

DS.19 SHINGLE – ACCESSORIES

YOU CAN FIND A LIST OF ACCESSORIES FOR THE PRODUCT HERE

PREFA edge cleat strip for shingles, DS.19, rhomboid roof tiles, FX.12 and R.16

PREFA EDGE CLEAT STRIP FOR SHINGLES, DS.19, RHOMBOID ROOF TILES, FX.12 AND R.16

1800 × 158 × 1,00 mm, pre-drilled

PREFA DS.19 fitting shingle

PREFA DS.19 FITTING SHINGLE

445 × 262 mm
Note: not suitable for the entire roof

PREFA patent clip for roof tile and shingle

PREFA PATENT CLIP FOR ROOF TILE AND SHINGLE

made of uncoated aluminium alloy

PREFA bird screen

PREFA BIRD SCREEN

125 × 2.000 × 0,7 mm, round perforations Ø 5/7 mm

PREFA ventilation screen

PREFA VENTILATION SCREEN

square perforations (6 mm); colours brown/anthracite and light grey/light grey; dimensions: 1.00 × 250 mm and 1.00 × 333 mm

PREFA eaves apron ice strip

PREFA EAVES APRON ICE STRIP

230 × 2.000 × 0,70 mm

PREFA verge flashing

PREFA VERGE FLASHING

95 × 2.000 × 0,70 mm
with cleat strip

PREFA safety valley

PREFA SAFETY VALLEY

3.000 mm
with double lock standing seam (canted)

PREFA frog-mouth vent cover

PREFA FROG-MOUTH VENT COVER

for riveting; air intake section: approx. 30 cm²

PREFA hip and ridge cap

PREFA HIP AND RIDGE CAP

500 × 1,00 mm

PREFA hip and ridge cap | end piece

PREFA HIP AND RIDGE CAP | END PIECE

PREFA ridge vent

PREFA RIDGE VENT

3.000 × 1,00 mm, 1.200 × 1,00 mm
for cold roofs; suitable for all rafter lengths

PREFA ridge vent end piece

PREFA RIDGE VENT END PIECE

PREFA roof hatch

PREFA ROOF HATCH

Inside dimensions: 595 × 595 mm; from roof pitches of 12°, complete with wooden frame, opening restrictor with cotter pin and 6 mm twinwall clear sheet

PREFA flashing for Velux roof windows

PREFA FLASHING FOR VELUX ROOF WINDOWS

available in various dimensions

PREFA flashing for Roto roof windows

PREFA FLASHING FOR ROTO ROOF WINDOWS

available in various dimensions

PREFA safety tread

PREFA SAFETY TREAD

composed of safety tread and two mounts with surface sealant, including fixing material, adjustable for roof pitches between 12° and 60° According to DIN EN 516-1-A

PREFA walkway support on one foot

PREFA WALKWAY SUPPORT ON ONE FOOT

250 mm
roof pitch: 5°-55°

PREFA walkway support on two feet

PREFA WALKWAY SUPPORT ON TWO FEET

360 mm
roof pitch: 12°-55°

PREFA walkway

PREFA WALKWAY

250 × 420 mm
250 × 600 mm
250 × 800 mm
250 × 1200 mm
360 × 800 mm
360 × 1.200 mm

Walkway connector

WALKWAY CONNECTOR

PREFA roof anchor hook according to EN 517 B (on mounts)

PREFA ROOF ANCHOR HOOK ACCORDING TO EN 517 B (ON MOUNTS)

PREFA roof anchor hook according to EN 517 B

PREFA ROOF ANCHOR HOOK ACCORDING TO EN 517 B

PREFA flashing plate (for seaming)

PREFA FLASHING PLATE (FOR SEAMING)

roof pitch: 12° - 52°
Ø 80 - 125 mm

PREFA universal flashing

PREFA UNIVERSAL FLASHING

for pipes with a diameter of 40–120 mm
roof pitch: 12°–52°

PREFA ventilation cap

PREFA VENTILATION CAP

roof pitch from 12°
Ø 100 mm

PREFA vent pipe

PREFA VENT PIPE

Ø 100 mm, Ø 120 mm, flashing plates

PREFA flexible pipe collar 100

PREFA FLEXIBLE PIPE COLLAR 100

Ø 100 – 130 mm, permanently flexible EPDM pipe collar for roof openings

PREFA snow guard for R.16, FX.12 and DS.19

PREFA SNOW GUARD FOR R.16, FX.12 AND DS.19

PREFA base plate for rhomboid roof tile 44 × 44 and DS.19

PREFA BASE PLATE FOR RHOMBOID ROOF TILE 44 × 44 AND DS.19

680 mm × 125 mm

PREFA pipe-style snow guard bracket

PREFA PIPE-STYLE SNOW GUARD BRACKET

Opening height: 135 mm; bracket height: 165 mm

PREFA pipe

PREFA PIPE

for pipe-style snow guard brackets
15 × 3.000 mm

End piece for pipe style snow guard

END PIECE FOR PIPE STYLE SNOW GUARD

PREFA pipe-style snow guard system

PREFA PIPE-STYLE SNOW GUARD SYSTEM

with 3 pipe openings

PREFA removable pipe for pipe-style snow guard system

PREFA REMOVABLE PIPE FOR PIPE-STYLE SNOW GUARD SYSTEM

3.000 mm 25/25

PREFA ice-retention

PREFA ICE-RETENTION

removable pipe including fixing material for pipe-style snow guard system

PREFA end piece for pipe-style snow guard system

PREFA END PIECE FOR PIPE-STYLE SNOW GUARD SYSTEM

PREFA aluminium mountain snow guard bracket

PREFA ALUMINIUM MOUNTAIN SNOW GUARD BRACKET

300 × 246 mm, for logs Ø 140 mm

PREFA chimney cap

PREFA CHIMNEY CAP

700 × 700 mm, 800 × 800 mm, 1000 × 700 mm, 1100 × 800 mm, 1500 × 800 mm

PREFA flat profile

PREFA FLAT PROFILE

DS.19 SHINGLE - PLANNING AND INSTALLATION

MORE PRODUCT INFORMATION IS AVAILABLE FOR DOWNLOADING HERE

Note: download DWG and DXF format files by right-clicking and selecting “Save link as”.

LOGIN FOR INSTALLERS AND ARCHITECTS

YOUR PREFA PHOTO SERVICE

YOUR HOUSE WITH THE PREFA LOOK

Our photo montage shows you how attractive your house would look with a PREFA roof or PREFA façade.

TO THE PHOTO SERVICE
Information material

ORDER FREE BROCHURES

We’ll be sending your information out soon: we’ll send you free brochures containing watertight information directly to your home or to your email inbox.

ORDER FOR FREE
Print
Contact