Advantages of PREFA half-round gutter
Resistant
Made of coated aluminium produced in the coil coating process, which means that the coating layer remains malleable.
Free of heavy metals
Aluminium does not release harmful heavy metals.
Rustproof
Corrosion-free and durable thanks to aluminium
40-year guarantee
by tested original quality on material and P.10 colours
Resistant
Made of coated aluminium produced in the coil coating process, which means that the coating layer remains malleable.
Free of heavy metals
Aluminium does not release harmful heavy metals.
Rustproof
Corrosion-free and durable thanks to aluminium
40-year guarantee
by tested original quality on material and P.10 colours
Continuously temperature-resistant
from -30°C to +80°C
For a wide range of applications
Thanks to numerous colours in the range and four dimensions or two lengths, PREFA gutters are suitable for all roof coverings/pitched roofs (except copper roofs).
Wide range of gutter accessories
All-in-one system from gutter brackets to gutter outlets – technically and colourfully matched to our roof and façade systems
Continuously temperature-resistant
from -30°C to +80°C
For a wide range of applications
Thanks to numerous colours in the range and four dimensions or two lengths, PREFA gutters are suitable for all roof coverings/pitched roofs (except copper roofs).
Wide range of gutter accessories
All-in-one system from gutter brackets to gutter outlets – technically and colourfully matched to our roof and façade systems
Good for the environment
The PREFA aluminium drainage system is the best choice from an ecological point of view too. This is because aluminium does not release harmful heavy metal ions into the sewage water when gutters and pipes are constantly flushed out with rainwater, as is the case with conventional materials.
Think about your gutter after a storm or especially in autumn/winter.: Tip from the experts:
In autumn, but also after strong winds, rain or hail, leaves and branches may block the gutter. As a result, water can no longer drain off and may thus overflow. The accumulated water can also freeze in winter and damage the gutter and pipe. In any case, the rain barrel should be emptied and the rainwater collector should be closed and sealed with the corresponding plug in autumn to prevent frost damage.
Tip from the experts: Use rainwater sensibly: Also save money and resources in the garden.
The valuable rainwater does not have to seep away unused or be fed directly into the sewage system, as it can also be used as lime-free irrigation water for the garden. The PREFA water collector or downpipe cleanout is used for this purpose: they divert the rainwater into the rain barrel.
Colour range of the PREFA half-round gutter
The PREFA half-round gutter is available in the classic standard colours to match the roof and façade elements. The colour range in P.10 quality is constantly being expanded and adapted.
The P.10 finish is a high-quality and malleable lacquer coating that does not flake off, thus there is no need for tiresome repainting or touching up. The roof drainage is part of the PREFA all-in-one system made of aluminium and therefore fits perfectly with the PREFA roof and façade systems, both visually and functionally.
Colour overview (14)
Colour |
Code |
~ RAL |
250 | 280 |
333 |
400 |
|
P.10 brown |
7013 |
|||
|
P.10 anthracite |
7016 |
|||
|
P.10 black |
9005 |
|||
|
P.10 light grey |
7005 |
|||
|
P.10 prefa white |
9002 |
|||
|
P.10 nut brown |
8019 |
|||
|
P.10 dark grey |
7043 |
|||
|
brick red |
8004 |
|||
|
oxide red |
3009 |
|||
|
moss green |
6005 |
|||
|
zinc grey |
7030 |
|||
|
metallic silver |
9006 |
|||
|
plain aluminium |
||||
|
patina grey |
7042 |
Notes
- The RAL values stated are merely approximate values (~), some of which may differ vastly from the original PREFA colour and, under certain circumstances, may not reflect the subjective perception of the colour.
- Above all for colour quality P.10, it is almost impossible to define values due to the surface structure. In addition, the PREFA Siding colours P.10 stone grey, P.10 sand brown, P.10 Prefa bronze, P.10 patina green, natural oak, patina grey, walnut and grey oak are based on natural colours made up of several different shades.
- Coils and metal sheets plain aluminium: The guarantee does not cover surface appearance alterations caused by processing and environmental influences. Follow the instructions.
- Metallic colours may vary in shade.
- To identify exact colours for complementary components please consult original samples.
Be inspired by the projects already implemented with the PREFA half-round gutter.
With the roof drainage system from PREFA, elegant tone-in-tone solutions can be implemented or colour accents can be deliberately set. Here, we have put together some reference properties for inspiration, while even more can be found in our Reference Gallery.
Still got questions about the PREFA half-round gutter?
- Primary aluminium Aluminium is obtained from bauxite, an aluminium ore named after Les Baux – the place where it was discovered. Bauxit usually consists of up to 60% alumina, iron oxide and silica. It is mainly found in South America, Australia and Africa.
- Secondary aluminium Secondary aluminium consists of recycled aluminium and is recovered from scrap metal recycling. During preparation, only 5% of the extraction energy used to produce primary aluminium is used.
PREFA products are exclusively available through our trained, independent ‘partner companies’, who also perform the installation. This way, we can ensure that our products are installed properly. We offer regular training sessions for our tradesmen at the PREFA Academy, as we want to ensure that our products are handled with consistent quality.
Technical information
The coating layer is malleable and resistant to general chemicals and weather conditions. Coil coating production is accompanied by strict quality controls.
Temperature resistance |
Between –30° and +80° |
|---|---|
Quality controls |
layer thickness, gloss level, shade, paint hardness, paint adhesion, paint bonding, deformation resistance, paint hardening |
Gutter dimensions (piece lengths: 3 m and 6 m) |
250, 280, 333, 400 |
Aluminium downpipe (piece length: 3 m) |
Ø 60 mm, Ø 80 mm, Ø 100 mm, Ø 120 mm, Ø 150 mm
|
Planning & Application
Our installers and architects can download specification documents for the PREFA half-round gutter here.
Accessories for the PREFA half-round gutter
If you opt for the PREFA gutter system, you will get a cleverly designed all-in-one system with 100% original accessories. The colours of all accessory products are perfectly matched with the PREFA roof and façade systems. The PREFA gutter outlet creates a perfect transition to the PREFA downpipe, whereby the rainwater is safely directed from the roof towards the ground.
The PREFA overbar
For additional bracing of the gutters, and especially in snowy regions, PREFA overbars can be mounted between the gutter brackets, which are mounted on the rafters.
PREFA gutter in light grey reinforced with an overbar, in combination with FX. 12 roof panel
Gutter bracket
250, 280, 333, 400
Upright gutter bracket
280, 333, 400
Gutter bracket (Switzerland)
333
Fascia bracket
250, 280, 333
Gutter end cap
250, 280, 333, 400; can be used on both sides
Radius end cap
333; ca be used on both sides
Adhesive end cap
333; can be used on both sides
Gutter corner 90° (internal)
250, 280, 333, 400
Gutter corner 90° (internal)
250, 280, 333, 400
Gutter outlet
250, 280, 333, 400
Diagonal outlet
250, 280, 333, 400; can be used on both sides
Gutter expansion joint with bead and cover plate
250, 280, 333, 400
Gutter expansion joint without bead or cover plate
250, 280, 333, 400
Reinforcement hanger for aluminium gutter
250, 280, 333, 400
Eaves drip edge
230 × 2.000 × 0,70 mm
